Uniformation
GKthree 12K
Build: 298×164×300 mmVolume: 14.66 LXY res: 24 µmLight: COB Light Source + Refraction Lens
MSRP
$899
Where to buy
No active listings right now.
Best use cases
Large scale display statues, life-size cosplay armor pieces, engineering housings
Full specifications
Build
- Build envelope
- 298×164×300 mm
- Build volume
- 14.66 L
- Process
- mSLA / LCD
Light & optics
- Light/laser source
- COB Light Source + Refraction Lens
- Optical engine
- 13.6-inch 12K Monochrome LCD
- Light/laser power
- 700 mW
- Optical wavelength
- 405 nm
- XY resolution
- 24 µm
- Min layer thickness
- 10 µm
- Heated vat temp
- 35 °C
- Peeling mechanism
- High-Speed ACF Release Film
Resin handling
- Vat capacity
- 2.2 L
- Open material architecture
- Yes
- Automated resin handling
- N
- Compatible resin families
- High-Speed, Tough, ABS-Like, Engineering
Physical
- Max print speed
- 80 mm/h
- Power consumption
- 220 W
- Machine weight
- 24 kg
- Best use cases
- Large scale display statues, life-size cosplay armor pieces, engineering housings
Data quality
- Data confidence
- Not yet verified
Accessories for this printer
Browse all →Wash & cure stations
Figure 4 UV Cure Unit 350
OfficialThe Figure 4 UV Cure Unit 350 is a dedicated post-processing station designed to finalize parts printed on the Figure 4 Modular system. It uses light-based curing to achieve the necessary material properties in minutes rather than hours.
—
Sample Wash & Cure Station
All-in-one washing and UV curing for resin prints.
$70
Safety & ventilation
Similar printers
MSRP
$899
No listing