Anycubic
Photon Mono M7 Max
Build: 298×164×300 mmVolume: 14.66 LXY res: 46 µmLight: Matrix UV LED Light Source
MSRP
$899
Where to buy
No active listings right now.
Best use cases
Extra-large consumer prototypes, cosplay props, movie miniatures
Full specifications
Build
- Build envelope
- 298×164×300 mm
- Build volume
- 14.66 L
- Process
- mSLA / LCD
Light & optics
- Light/laser source
- Matrix UV LED Light Source
- Optical engine
- 13.6-inch 7K Mono LCD
- Light/laser power
- 550 mW
- Optical wavelength
- 405 nm
- XY resolution
- 46 µm
- Min layer thickness
- 10 µm
- Heated vat temp
- 40 °C
- Peeling mechanism
- Dynamic High-Speed Release Film
Resin handling
- Vat capacity
- 2 L
- Open material architecture
- Yes
- Automated resin handling
- Y
- Compatible resin families
- Standard, ABS-Like, High-Speed, Water-Washable, Tough
Physical
- Max print speed
- 130 mm/h
- Power consumption
- 180 W
- Machine weight
- 18 kg
- Best use cases
- Extra-large consumer prototypes, cosplay props, movie miniatures
Data quality
- Data confidence
- Medium
- Data sources
- https://store.anycubic.com/products/photon-mono-m7-max; https://store.anycubic.com/products/photon-mono-m7-max.json; https://www.3djake.com/anycubic/photon-mono-m7-max
Accessories for this printer
Browse all →Wash & cure stations
Figure 4 UV Cure Unit 350
OfficialThe Figure 4 UV Cure Unit 350 is a dedicated post-processing station designed to finalize parts printed on the Figure 4 Modular system. It uses light-based curing to achieve the necessary material properties in minutes rather than hours.
—
Sample Wash & Cure Station
All-in-one washing and UV curing for resin prints.
$70
Safety & ventilation
Similar printers
MSRP
$899
No listing