Anycubic
Photon Mono M7 Pro
Build: 223×126×230 mmVolume: 6.46 LXY res: 16.8 µmLight: LightTurbo 3.0 COB + Fresnel Lens
MSRP
$649
Where to buy
No active listings right now.
Best use cases
High-speed miniatures, rapid mechanical prototypes, detailed figures
Full specifications
Build
- Build envelope
- 223×126×230 mm
- Build volume
- 6.46 L
- Process
- mSLA / LCD
Light & optics
- Light/laser source
- LightTurbo 3.0 COB + Fresnel Lens
- Optical engine
- 10.1-inch 14K Mono LCD
- Light/laser power
- 600 mW
- Optical wavelength
- 405 nm
- XY resolution
- 16.8 µm
- Min layer thickness
- 10 µm
- Heated vat temp
- 40 °C
- Peeling mechanism
- Dynamic High-Speed Release Film
Resin handling
- Vat capacity
- 1 L
- Open material architecture
- Yes
- Automated resin handling
- Y
- Compatible resin families
- High-Speed, ABS-Like, Water-Washable, Tough, Plant-Based
Physical
- Max print speed
- 170 mm/h
- Power consumption
- 150 W
- Machine weight
- 12.8 kg
- Best use cases
- High-speed miniatures, rapid mechanical prototypes, detailed figures
Data quality
- Data confidence
- Medium
- Data sources
- https://store.anycubic.com/products/photon-mono-m7-pro; https://store.anycubic.com/products/photon-mono-m7-pro.json; https://www.3djake.com/anycubic/photon-mono-m7-pro
Accessories for this printer
Browse all →Wash & cure stations
Figure 4 UV Cure Unit 350
OfficialThe Figure 4 UV Cure Unit 350 is a dedicated post-processing station designed to finalize parts printed on the Figure 4 Modular system. It uses light-based curing to achieve the necessary material properties in minutes rather than hours.
—
Sample Wash & Cure Station
All-in-one washing and UV curing for resin prints.
$70
Safety & ventilation
Similar printers
MSRP
$649
No listing