Anycubic
Photon M3 Premium
Build: 219×123×250 mmVolume: 6.73 LXY res: 28.5 µmLight: LighTurbo 2.0 UV LED Matrix
MSRP
$619
Where to buy
No active listings right now.
Best use cases
Mid-to-large precision figures, architectural models, engineering prototypes
Full specifications
Build
- Build envelope
- 219×123×250 mm
- Build volume
- 6.73 L
- Process
- mSLA / LCD
Light & optics
- Light/laser source
- LighTurbo 2.0 UV LED Matrix
- Optical engine
- 10-inch 8K Mono LCD
- Light/laser power
- 500 mW
- Optical wavelength
- 405 nm
- XY resolution
- 28.5 µm
- Min layer thickness
- 10 µm
- Heated vat temp
- 25 °C
- Peeling mechanism
- NFEP (PFA) Film Peeling
Resin handling
- Vat capacity
- 1.2 L
- Open material architecture
- Yes
- Automated resin handling
- N
- Compatible resin families
- Standard, ABS-Like, Tough, Clear, Water-Washable
Physical
- Max print speed
- 95 mm/h
- Power consumption
- 150 W
- Machine weight
- 13 kg
- Best use cases
- Mid-to-large precision figures, architectural models, engineering prototypes
Data quality
- Data confidence
- Not yet verified
Accessories for this printer
Browse all →Wash & cure stations
Figure 4 UV Cure Unit 350
OfficialThe Figure 4 UV Cure Unit 350 is a dedicated post-processing station designed to finalize parts printed on the Figure 4 Modular system. It uses light-based curing to achieve the necessary material properties in minutes rather than hours.
—
Sample Wash & Cure Station
All-in-one washing and UV curing for resin prints.
$70
Safety & ventilation
Similar printers
MSRP
$619
No listing