MiiCraft
Prime 110 HR
Build: 110×62×120 mmVolume: 0.82 LXY res: 28 µmLight: High-Uniformity 385nm UV LED Engine
MSRP
$18.5k
Where to buy
No active listings right now.
Best use cases
High-end jewelry pavé settings, micro-mechanical gears, research laboratory chips
Full specifications
Build
- Build envelope
- 110×62×120 mm
- Build volume
- 0.82 L
- Process
- DLP
Light & optics
- Light/laser source
- High-Uniformity 385nm UV LED Engine
- Optical engine
- Industrial 4K DLP Projection Engine
- Light/laser power
- 1500 mW
- Optical wavelength
- 385 nm
- XY resolution
- 28 µm
- Min layer thickness
- 10 µm
- Heated vat temp
- 35 °C
- Peeling mechanism
- Dynamic Peeling Flex-Vat
Resin handling
- Vat capacity
- 0.6 L
- Open material architecture
- Yes
- Automated resin handling
- N
- Compatible resin families
- Industrial Castable, High-Temp Ceramic Slurry, Dental
Physical
- Max print speed
- 70 mm/h
- Power consumption
- 220 W
- Machine weight
- 22 kg
- Best use cases
- High-end jewelry pavé settings, micro-mechanical gears, research laboratory chips
Data quality
- Data confidence
- Not yet verified
Accessories for this printer
Browse all →Wash & cure stations
Figure 4 UV Cure Unit 350
OfficialThe Figure 4 UV Cure Unit 350 is a dedicated post-processing station designed to finalize parts printed on the Figure 4 Modular system. It uses light-based curing to achieve the necessary material properties in minutes rather than hours.
—
Sample Wash & Cure Station
All-in-one washing and UV curing for resin prints.
$70
Safety & ventilation
Similar printers
MSRP
$18.5k
No listing