Kudo3D
Bean 3D
Build: 120×68×150 mmVolume: 1.22 LXY res: 47 µmLight: High-Resolution UV LED Matrix
MSRP
$399
Where to buy
No active listings right now.
Best use cases
Fine jewelry patterns, detailed miniatures, hobbyist crafting
Full specifications
Build
- Build envelope
- 120×68×150 mm
- Build volume
- 1.22 L
- Process
- mSLA / LCD
Light & optics
- Light/laser source
- High-Resolution UV LED Matrix
- Optical engine
- 5.5-inch 2K Mono LCD
- Light/laser power
- 280 mW
- Optical wavelength
- 405 nm
- XY resolution
- 47 µm
- Min layer thickness
- 10 µm
- Heated vat temp
- 25 °C
- Peeling mechanism
- PSP (Passive Separation Protocol)
Resin handling
- Vat capacity
- 0.4 L
- Open material architecture
- Yes
- Automated resin handling
- N
- Compatible resin families
- Standard, Castable, Tough
Physical
- Max print speed
- 20 mm/h
- Power consumption
- 50 W
- Machine weight
- 4.5 kg
- Best use cases
- Fine jewelry patterns, detailed miniatures, hobbyist crafting
Data quality
- Data confidence
- Not yet verified
Accessories for this printer
Browse all →Wash & cure stations
Figure 4 UV Cure Unit 350
OfficialThe Figure 4 UV Cure Unit 350 is a dedicated post-processing station designed to finalize parts printed on the Figure 4 Modular system. It uses light-based curing to achieve the necessary material properties in minutes rather than hours.
—
Sample Wash & Cure Station
All-in-one washing and UV curing for resin prints.
$70
Safety & ventilation
Similar printers
MSRP
$399
No listing